Artificial grass joint tape is essential to connect multiple pieces of artificial grass together. The tape covers the whole length of your join and acts as a base for your adhesive.
It’s simple to work out how much artificial grass joining tape you need! As shown in the above video, you just need to work out the length of your join (the area between 2 pieces of grass). If the length of the join is 4m, you need the same amount of tape.
The artificial grass joining tape has 2 sides, one is green and shiny and one is white and matt. The tape goes in between the 2 pieces of grass, shiny side down, and the glue is applied on the top.
If you still have some questions about how to install your grass, check out the video at the bottom of this blog, which shows the full process from start to finish!
Artificial grass glue
BuzzGrass artificial grass glue comes in 2 sizes – tubes and 5.5kg tubs.
As a guide, the tubes will cover a small join of around 3m, whereas one tub should cover 15m of join. Remember – if you would prefer to use the small tubes, you can just buy multiple tubes!
As artificial grass adhesives go, our product is renowned for its weather resistance, keeping everything firm and secure with everything the British weather has to offer! Our adhesive is safe for use with sports turf and artificial grass.
Top tip – You can also use it to stick the fake grass to hard, firm surfaces like concrete or plyboard on decking.
Don’t forget a turf glue spreader to evenly apply the glue!
Other accessories you may need
- Artificial grass underlay (recommended) – the geotextile layer sits under artificial grass and acts as an effective weed barrier
- Artificial grass pins (recommended) – pins are to keep your synthetic turf secure
- Artificial grass cleaner (recommended) – our all-in-one cleaner will clean and disinfect your artificial grass in minutes – perfect if you have pets
- Performance pad (optional depending on your surface) – our pads add a springy cushion beneath your grass to soften any falls and steps
Leave a Reply